Pilous ARG 400 Semi-Automatic Horizontal Band Saw (480Volts)

Description

Specification
Description
Cutting Ranges, Round
15.74" @ 90 Deg
Square
15.35" @ 90 Deg
Rectangle
18.89" x 6.70"
Round
12.2" @ 45 Deg
Square
11.02" @ 45 Deg
Round
8.26" @ 60 Deg
Square
7.87" @ 60 Deg
Rectangle
9.84" x 7.08" @ 60 Deg
Cutting Speeds
100 to 300 Feet Per Min.
Cutting Angle
90 - 45 Deg, 90- 60 Deg
Saw Blade
169.29" x 1.25" x .042"
Work Height of Vise
31.29"
Main Motor
4 HP
Electrics
460 Volt/ 3 PH
Approx Machine Dims
98.5" x 50" x 60" H
Approx Weight
2,500 Lbs.
In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy grey cast iron turntable on both sides in massive “houses” fitted with pre-stressing tapered roller bearings. Massive machine base and exceptionally robust grey cast iron vice with a large material loading surface. The base of the machine is by default equipped with a removable chips container or with an additional chips conveyor. The system is mounted on tapered roller bearings in order to facilitate the easiest possible rotation of the arm during angular cutting. Simple locking and adjusting of a required cutting angle on the angle scale or, as additional accessories, digital monitoring on a touch screen. Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine. Noiseless and maintenance-free band drive is provided by an in-dustrial electric motor with worm gearbox. The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently and on an additional adjustable outlet. Coolant tank with a pump is placed in the base of the machine. The machine checks correct tension or break of the saw band. If the saw band breaks the machine automatically switches off. Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.